Beechfield House Hotel

地址: Beanacre, Melksham, Wiltshire, BeanacreSN12 7PU, 英国

From London via M4 Take the M4 towards Bristol and exit at Junction 17. Follow signs for Poole (A350). Once bypassed Chippenham and Lacock, entering the village of Beanacre continue through the village. Upon beginning to exit the village look for signs on the left to Beechfield House. Do not take the first signed entrance (deliveries) but take the second entrance up the driveway leading to the front of the house.

From Bath From Bath take the A4 towards Chippenham. When approaching Chippenham there will be signs for the A350. Take the A350 towards Melksham and Poole. Keep on the A350 and after Lacock, when entering the village of Beanacre. Upon beginning to exit the village look for signs on the left to Beechfield House. Do not take the first signed entrance (deliveries) but take the second entrance up the driveway leading to the front of the house.

From the South via M3 Leave the M3 at junction 8 heading west on the A303. Take the exit for the A350, just after Chicklade, and continue North until entering the village of Beanacre. The hotel will then be found immediately on the right.

From the Southwest Heading East on the A303, take the exit for the A350, just after West Knoyle, and continue North until entering the village of Beanacre. The hotel will then be found immediately on the right.

By Rail Beechfield House is near to two railway stations Melksham - approximately 2 minutes by car and Chippenham - approximately 15 minutes by car Chippenham Station is on the mainline London to Bath route. Taxis can be ordered for guests - please contact reception in advance of the journey. Contact details are available on the booking confirmation.